User Manual
London – United Kingdom
www.saten.co.uk
UAE – Dubai
Fourth Floor, 30-31 Furnival Street
JAFZA - Al Aweer
Post code: EC4A 1JQ
TEL: +97143205447
TEL: +448456769185
FAX: +97143205448
1.
Click Menu > Settings > PTZ to enter the PTZ Settings menu, shown in Figure 2.
Figure 2. PTZ Settings Menu
2.
Select channel where PTZ camera is installed next to
Camera
label.
3.
Configure the settings of baud rate, data bit, stop bit, parity, flow control, PTZ protocol and
address.
4.
Click
OK
to save settings and exit the PTZ Settings menu.
Note:
All setting parameters (baud rate, data bit, stop bit, parity, flow control, PTZ protocol and address)
must be consistent with the PTZ camera connected.
Setting PTZ Presets, Patrols & Patterns
The DVR allows you to program presets, patrols and patterns for a connected PTZ camera.
Understanding PTZ Controls
The PTZ control panel provides a series of PTZ controls, shown in Figure 3.
Figure 3. PTZ Control Interface
