SATEL SMET-256
15
HTTP port
– in this field, enter the number of network port to be used for opening the web
browser. Values from 1 to 65535 can be entered. The value must be different from that
entered for the other port. By default: 80.
Note:
By default, the port 80 in the computer is intended for the web browser. If a different
port is set in the converter, enter a colon and the port number after the converter IP
address entered in the web browser.
"Advanced" tab
Fig. 10. The "Advanced" tab, "Configuration" window in the web browser (the window
available in the SMET-256 Soft program differs only in graphic details).
Restoring factory default settings
The parameters defined in this area will restore the converter factory settings.
Configuration
– when you select this box and click on the "Restore values" button, all
parameters and settings in the "Configuration" window will be restored to their default
values, except for the MAC address list defined in the "Network" tab.
Subscribers
– when you select this box and click on the "Restore values" button, all
data in the "Subscribers" tab will be erased.
MAC
– when you select this box and click on the "Restore values" button, the list of
MAC addresses defined in the "Network" tab will be erased.
Events memory
– when you select this box and click on the "Restore values" button,
you will clear the events memory, i.e. all the events the receipt of which has been
acknowledged by the converter, but which have not yet been sent to the monitoring
station. Also, the device restart will take place.
