SATEL SMET-256
11
Time server (NTP)
– available, if the “Time synchronization” box is checked. In this field,
enter the IP address of the time server which supports the NTP protocol.
Time zone
– in this field, enter the time zone, i.e. the difference between the universal time
(UTC) and the zone time.
System time
– displayed in this field is the time based on the computer clock.
Send
– click the button to write the time displayed in the "System time" field to the converter.
"RS port" tab
Fig. 7. The "RS port" tab, "Configuration" window in the web browser (the window available in
the SMET-256 Soft program differs only in graphic details).
The settings in the tab apply to communication with the monitoring station.
Bits per second
– transmission rate. The following values can be selected:
−
57600 [default setting]
−
38400
−
19200
−
9600
−
4800
−
2400
−
1200
Data bit
– amount of data sent after the start bit. 6, 7 or 8 bits can be sent. By default: 8.
Parity
– parity check, i.e. checking the number of bits of value 1 in data bits. The following
settings can be selected:
−
None [default setting]
−
Even
−
Odd
Stop bit
– stop bit length. You can choose the value 1 or 2. By default: 1.
