SATEL MTX-300
3
1. Introduction
The MTX-300 controller can be used for expansion of an alarm system or an automation
system by adding wireless devices and keyfob control capability. The controller interacts with
the alarm system or automation system by means of outputs and inputs/zones.
The controller supports the following devices:
keyfobs
MPT-300
– 5-button keyfob
T-4
– 4-button keyfob
T-2
– 2-button keyfob
T-1
– 1-button keyfob
P-4
– 4-button keyfob
P-2
– 2-button keyfob
detectors
MFD-300
– wireless water flood detector
MGD-300
– wireless glass-break detector
MMD-300
– wireless magnetic contact
MMD-302
– wireless magnetic contact with input for roller shutter detector
MPD-300
– wireless passive infrared detector
MSD-300
– wireless smoke and heat detector
siren
MSP-300
– wireless outdoor siren
2. Features
Built-in 433 MHz radio transceiver.
Support for 433 MHz radio devices manufactured by SATEL:
– up to 32 keyfobs,
– up to 16 detectors,
– up to 4 sirens.
Encrypted transmissions from wireless detectors.
Two-way encrypted communication with wireless sirens.
Transmissions from keyfobs dynamically secured with KeeLoq rolling code.
Up to 6 control functions available from keyfob.
8 programmable relay outputs:
– control by means of detectors or keyfobs,
– ability to simultaneously control several outputs with a single keyfob button.
Relay output to provide information about tamper of controller and wireless devices.
OC type output to indicate loss of communication with wireless devices.
OC type output to indicate low battery in keyfob, detector or siren.
2 programmable inputs to control sirens.
4-character LED display for easy programming and diagnostics.
Programming by means of on-board buttons or MTX
SOFT
program.
Tamper memory.