22 INT-TSI
SATEL
– enabling chime signal in the keypad, using the
key;
enu after confirmation of the data entered.
vibration detector test run upon starting the arming procedure).
2
lable
iting the function without
by using the
– ending the function and exiting the user m
1 long beep
– signaling of:
– violated / bypassed zones when arming;
– fault of the vibration detector (10. 24
H VIBRATION
type zone was not violated during the
long beeps
– invalid code, function not avai
or ex
confirmation of the data entered (e.g.
key).
E
3 long beeps
– unavailable function.
vents signaled by sounds
5.2
Only installer selected events are signaled.
Alarms are being signaled throughout the time programmed by the installer.
5 s
Lo
of short beeps for 10 seconds
will be generated).
peated every few seconds
–
ds
– countdown of entry delay.
ling a new trouble.
ontinuous beep
– alarm.
ong beep every second
– fire alarm.
hort beeps
– zone violation (CHIME).
ng beep every 3 seconds, followed by a series
and 1 long beep
– countdown of exit delay (if the time is shorter than 10 seconds, only
the final sequence of short beeps
A sequence of 7 beeps of diminishing duration, re
countdown of auto-arming delay.
2 short beeps every secon
2 short beeps every 3 seconds
– signa
C
L
