SATEL INT-TSI
21
4.2.2 Tab containing i.a. the event list presentation widget
tap to display the alarms logged to event log.
tap to display the events of arming / disarming and alarm clearing type.
tap to display the troubles logged to event log.
tap to display the events of zone bypassing / unbypassing type.
tap to display all events.
event list presentation widget (see p. 17).
5. Sound signaling
The installer can disable the sound signaling.
5.1 Beeps generated when using the terminal
1 short beep
– touching a number key.
2 short beeps
– confirmation of command execution, signaling of entering the user menu,
submenu or function.
3 short beeps
– signaling of:
– starting the arming procedure (if no exit delay has been programmed, this is equivalent
to arming):
– disarming and/or alarm clearing;
– turning output off;
– disabling chime signal in the keypad, using the
key;
– exiting the function and returning to the menu after confirmation of the data entered.
4 short beeps and 1 long beep
– signaling of:
– turning output on;
