SATEL INT-TSI
17
Filtering by status
Proceed in the same way as for filtering the zones by status (p. 14).
3.4.17 Event list
It presents events downloaded from the control panel and saved to the memory card in the
keypad. Double tapping an event will display a window with detailed information on the event.
Only after you log in using the service code will the following information be displayed:
panic alarms;
alarms triggered with the D
URESS
type code.
Filtering by text
Proceed in the same way as for filtering the zones by name (p. 14).
Filtering by type
Proceed in the same way as for filtering the zones by status (p. 14). Additionally, events from
the specific time interval can be displayed.
3.4.18 Alarm
Indicates whether there is an alarm. The same icon is used as in the “System status” widget
(p. 10). The widget can be described.
3.4.19 Trouble
Indicates whether there is a trouble. The same icon is used as in the “System status” widget
(p. 10). The widget can be described.
3.4.20 Arm
Provides information about arming, delay countdown etc. in the partitions operated by the
keypad. The same icons are used as in the “System status” widget (p. 10). The widget can
be described.
3.4.21 Service
Indicates whether the service mode is entered. The same icon is used as in the “System
status” widget (p. 10). The widget can be described.
3.4.22 Partition
Indicates the status of a single partition. The same icons are used as in the “Partition list”
widget (p. 15). The widget can be described.
