SATEL INT-TSI
15
The S
HUTTER UP
and S
HUTTER DOWN
type of outputs are always programmed as
consecutive and in pairs. Only the output of
SHUTTER UP
type is displayed in the list,
though the status information applies to both outputs (when one of the outputs is
activated, the other one is deactivated).
Icon
Output status
deactivated
activated [does not apply to roller shutter outputs]
SHUTTER UP
type output is activated
SHUTTER DOWN
type output is activated
Output control
You can control the outputs of MONO
SWITCH
, BI
SWITCH
, R
EMOTE SWITCH
type and the
roller shutter outputs.
1. Find in the list the output which is to be controlled.
2. Tap the output name to highlight the output.
3. Tap the
icon (for the roller shutter output, double tap the icon, if the S
HUTTER DOWN
type output is to be activated). Next to the icon presenting the current output status, an
icon presenting the next status will be displayed (e.g.
/
).
4. Tap the
icon. The output status will change.
Filtering by name
Proceed in the same way as for filtering the zones by name (p. 14).
Filtering by status
Proceed in the same way as for filtering the zones by status (p. 14).
3.4.16 Partition list
It presents the list of partitions and their status by means of icons.
