The INT-KWRL wireless keypad enables operation and programming of the INTEGRA and
INTEGRA Plus control panels with firmware version 1.17 (or newer). The device is designed
for work within the ABAX two-way wireless system. It is supported by the ACU-120 /
ACU-270 controller with firmware version 5.03 (or newer) connected to the INTEGRA /
INTEGRA Plus control panel.
The ACU-120 / ACU-270 controller which is to support the INT-KWRL keypad must be
connected to the expander bus (controller terminals CKE and DTE) and the keypad
bus (controller terminals CKM and DTM) of the alarm control panel.
Switch 8 in the ACU-120 / ACU-270 controller must be set to the OFF position.
The keypad is not supported by the ARU-100 radio signal repeater or by the
INTEGRA 128-WRL control panel.
Fig. 1. INT-KWRL keypad.
