SATEL INT-KWRL
13
Fig. 8. DLOADX
program: keypad settings stored in the control panel – “User functions
definition” tab.
Proximity cards
Card function
Card read
[Card close] – you can select the function executed after presenting the card.
Card holddown
[Card close long] – you can select the function executed after holding the
card.
Door
[Door to open] – if presenting the card or holding it is to open a door, you must indicate
the door supervised by the access control module or the 101. C
ARD READ
–
EXPANDER
type
output.
Fig. 9. DLOADX
program: keypad settings stored in the control panel – “Proximity cards” tab.
Wrong card
Signal on wrong card
[Unkn.card sig.] – if this option is enabled, reading in an unknown
card will be signaled by two long beeps.
