SATA TrueSun, Operating Instructions Manual, Page: 284 / 294

284
US
Operating Instructions for SATA trueSun
Operating parameters
■ Only operate the LED lamp, battery and charger within the parameters
specified on the rating plate.
Cleaning
■ Never use solvents or materials containing solvents to clean the LED
lamp, battery or charger. Always use SATA wet and dry cloths (Art. No.
75358) for cleaning.
3. Intended Use
The LED lamp is used to simulate sunlight shining on painted surfaces.
4. Description
The LED lamp is used to illuminate repainted surfaces. By simulating
sunlight, the LED lamp can detect the finest differences in the painted
surface.
5. Scope of Delivery
■ LED lamp
■ Lithium-ion battery
■ Charger
■ Operating Instructions
After unpacking check whether:
■ LED lamp, lithium-ion battery and charger are not damaged
■ The scope of delivery is complete (see 5)
6. Technical Design
6.1. LED lamp
[1-1]
Impact protector for
protective plate
[1-2] Full range dimmer with level
control (not shown)
[1-3] Protective film pull-tab
[1-4]
Button
[1-5] Protective plate with
protective film
[1-6] Battery release
[1-7]
Battery
[1-8] Battery compartment
[1-9] Plug (UK)
[1-10] Plug (US)
[1-11] Plug (EU)
[1-12]
LED 1
[1-13] LED 2
[1-14] Bat. Info. button
7. Technical Data
LED lamp