11
V_SC_51075C_202104
a finger to be placed on the switch that
connects to the power supply, or for the
plug to be inserted when the switch is
connected.
4) Remove all adjusting keys or wrenches
before electric tools are connected.
Leaving a wrench or key in the rotating
part of an electric tool will result in
personal injury.
5) Do not stretch your hands for too long
and always pay attention to your feet and
balance your body. In this way, electric
tools can be properly controlled so as to
prevent the occurrence of accidents.
6) Dress properly. Do not wear loose clothes
or accessories. Keep clothes, gloves
and hair away from moving parts. Loose
clothes, accessories or long hair may
become entangled into moving parts.
7) If devices are provided that connect to the
chip conveyor or dust collector, ensure
that they are properly connected and
used. The use of these devices will reduce
the risk of dust or chips.
Safety precautions for general electric
tools – electric tool usage and precautions
1) Do not misuse electric tools. Use the
proper electric tool according to the
purpose. The use of properly-designed
electric tools will make your work more
effective and safer.
2) If the tool cannot be powered on/off, it
cannot be used. Electric tools that cannot
be controlled by a switch are hazardous
and must be repaired.
3) Before carrying out any adjustment,
replacing accessories or storing electric
tools, remove the plug from the power
supply and/or disconnect the battery box
from the tool. This protective measure will
reduce the risk of the accidental starting
of tools.
4) Store unused electric tools outside
the reach of children and do not ask
personnel unfamiliar with electric tools
or these instructions to operate electric
tools. Electric tools are hazardous when
operated by untrained users.
5) Maintain electric tools. Check whether
the moving parts are adjusted properly or
stuck, and check the damage conditions
of the parts and other factors that may
affect their operation. As many accidents
are caused due to poorly-maintained
electric tools, damaged electric tools shall
be repaired before use.
6) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges will not easily get
stuck and will be easier to control.
7) Use electric tools and the accessories and
cutting tips of tools based on the operation
conditions and future operations, and
according to the operation instructions. It
may be hazardous to use an electric tool
that does not conform to the purpose at
hand.
Safety precautions for general electric
tools – rechargeable tool usage and
precautions
1) Charge only with the charger specified by
the manufacturer. When a charger suitable
for one battery box is used for another
battery box, it causes a fire hazard.
2) Electric tools can only be used with a
special battery box. The use of other
battery boxes will result in damage and
fire hazards.
3) When the battery pack is not used, keep
it away from other metal objects such as
Summary of Contents for 51075C
