10
51075C
GENERAL SAFETY WARNING OF ELEC
TRIC TOOL:
Read all safety precautions and instructions.
Failure to conform to the following precautions
and instructions can result in electric shock,
fire hazard and/or severe injury. Keep all
instructions and precautions for future
reference. The term “electric tool” in all the
following precautions means a mains supply
driven (wired) electric tool or battery driven
(wireless) electric tool.
Safety precautions for general electric
tools – worksite
1) Keep the worksite clean and well
illuminated. A disorderly work site with
dark places will result in accidents.
2) Do not operate electric tools in explosion
risk environments containing flammable
liquids, gases or dust. The sparks arising
from electric tools can ignite dust or gas.
3) Only operate electric tools after the
departure of children and bystanders.
Inattention or distraction will cause the
operator to be unable to control the tools.
Safety precautions for general electric
tools – electric safety
1) The plug of an electric tool shall match
with the socket. Never modify the plug
in any form. Never apply an adapter to
any plug that requires grounding. Never
modify the plug in any way. Unmodified
plugs and matching sockets reduce the
risk of electric shock.
2) Avoid contact between the body and such
grounding surfaces as pipelines, radiating
fins and refrigerators. Grounding your
body will increase the risk of electric
shock.
3) Do not expose electric tools to rain or
humid environments. The presence of
water in electric tools will increase the
risk of electric shock.
4) Do not misuse wires. Never carry or drag
electric tools by the wires, or pull the wire
to remove the plug. Keep electric tools
away from heat sources, oil, sharp edges
and moving parts. Damaged or twisted
flexible wires will increase the risk of
electric shock.
5) When electric tools are used outdoors, use
external flexible wires that are suitable for
outdoor use in order to reduce the risk of
electric shock.
6) If using electric tools in a humid
environment cannot be avoided, adopt
a residual current operated protective
device (RCD) in order to reduce the risk of
electric shock.
Safety precautions for general electric
tools – personal safety
1) Stay alert, stay awake and pay attention
to your operation when operating electric
tools. Do not operate electric tools when
you are tired or affected by drugs, alcohol
or medical treatment. A moment of
negligence during the operation of electric
tools will result in severe injury.
2) Use personal protective equipment. Always
wear goggles. The use of such safety
device PPEs as anti-dust masks, anti-skid
safety shoes, safety helmets and hearing
protection devices where appropriate
under proper conditions will reduce
personal injuries.
3) Prevent accidental unexpected startup.
Ensure that the switch is turned off
when connecting the power supply and/
or battery box, and when picking up or
carrying the tool. It may be hazardous for
WARNING
Summary of Contents for 51075C
