SATA 51075C, Operation Instruction Manual

Page: 19 / 20

19 V_SC_51075C_202104
As mentioned above, if a battery pack is used
for a too long a time, its working time will be
shortened. This is the problem of charging times.
After a few charges and uses, the situation will
improve. During such heavy work as turning
large screws into hardwood, the battery pack
will also run out quickly. Do not charge it in an
environment lower than 0 °C or higher than 45
°C as this will also affect the performance of the
battery pack.
MAINTENANCE
Be sure to remove the plug before making
any changes or repairs to the machine tool.
Your electric tools do not need to be filled
with lubricating oil or maintained. Do not
clean your electric tools in water or chemical
cleaning agent, just wipe them off with a piece
of dry cloth. The tools shall be stored in a dry
environment and their motor vents shall be kept
clean. Do not use in a dusty environment.
Disposal of discarded battery packs
1) Store the battery pack below 26 after
charging it to 30%-50%.
2) Charge the battery pack fully once in less
than 6 months.
DISPOSAL OF DISCARDED BATTERY
To protect the natural environment,
please recycle or dispose of battery
packs properly. The battery packs
contain lithium batteries. Please
consult the local waste disposal
department for information on
recycling and/or disposal. Run out
the battery pack with the hand drill,
remove the battery pack and wrap the
pole port with duct tape to avoid short
circuit and electric leakage. Do not
attempt to open or remove any part.
PACK
Disposal of waste
In order to respond to the call for
environmental protection, damaged
machine tools, accessories and
packaging materials shall be classified
in detail so as to facilitate recycling.
In order to facilitate the convenience
of classification and recycling, plastic
parts shall be marked with material
identification.