![background image](http://html1.mh-extra.com/html/oem-tools/24487/24487_operating-instructions-and-parts-manual_3399643001.webp)
UNPACKING
After unpacking unit, inspect carefully for any
damage that may have occurred during transit.
Check for loose, missing, or damaged parts. If
any damage is observed, a shipping damage
claim must be filed with carrier. DO NOT use the
OEMTOOLS
™
Impact Driver if broken, bent, cracked
or damaged parts (including labels) are noted. Any
Impact Driver that appears damaged in any way,
operates abnormally or is missing parts should be
removed from service immediately. If you suspect
that the Impact Driver was subjected to shock load
(a load that was dropped suddenly, unexpectedly,
etc.) immediately discontinue use until it has been
checked by a factory authorized service center.
*Voltage is measured without workload. Maximum
initial battery voltage after charging. Nominal voltage
is 18 Volts.
Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and others by observing all
safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property. Please
retain instructions for future reference.
The following safety information is provided as a guideline to help you operate your Impact Driver under the safest possible conditions. Any tool or piece of
equipment can be potentially dangerous to use when safety or safe handling instructions are not known or not followed. The following safety instructions
are to provide the user with the information necessary for safe use and operation. Please read and retain these instructions for the continued safe use of
your service system. Failure to follow instructions listed below may result in serious injury. In addition, make certain that anyone who uses the equipment
understands and follows these safety instructions as well.
Operating Instructions and Parts Manual
24487
FOR CUSTOMER SERVICE
Technical Question?
CALL 1-866-458-2472
20V MAX* LITHIUM-ION BRUSHLESS
1/4" DRIVE IMPACT DRIVER
Thank you very much for choosing an OEMTOOLS™ Product!
For future reference, please register your new tool at www.oem-tools.com and complete the owner’s record below:
Model: _______________ Purchase Date: ___________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin
using it. This product is designed for certain applications only. OEMTOOLS
™
cannot be responsible for issues arising from modification. We strongly
recommend this product is not modified and/or used for any application other than that for which it was designed. If you have any questions relative to a particular
application, DO NOT use the product until you have first contacted customer service to determine if it can or should be performed on the product.
WARNING
:
This product can expose you to chemicals, including lead, which are known to the State of California to cause cancer and birth defects
or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Explanation of Safety Signal Words
CAUTION
: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
: Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage.
: Provide clarity and helpful information.
WARNING
CAUTION
NOTES
WARNING
11/18
2018 OEMTOOLS
™