SATA 51075, User Manual

Page: 14 / 84

中文
EN DE RU KO PT JA ES 51075
14
Professional requirements:
1
）
The battery pack shall be removed before the machine tool is repaired.
2
）
Do not expose the machine tool to rain or water.
3
）
Do not store the battery pack at temperatures higher than 40
℃
.
4
）
Charge at temperatures of under 30
℃
. 18–24
℃
is optimal.
5
）
Only use the charger and battery pack that came with the machine tool.
6
）
Avoid the short circuit of the battery pack
（
for example, do not allow bolts, nails, etc. make contact with the positive and negative
poles of the battery pack
）
.
7
）
Do not burn the battery pack or discard it in fire as this may result in explosion.
8
）
Do not charge damaged battery packs.
9
）
If the power line on the charger is damaged, please replace it promptly.
10
）
Be sure to remove the charger power plug before removing the battery pack.
11
）
It is normal for the charger and battery pack to heat up during charging.
12
）
Do not insert a charged battery pack onto the charger when the machine tool is being used.
13
）
Please remove the battery pack from the charger immediately after charging.
14
）
It is normal for the body and battery pack to heat up when the machine tool is being used.
15
）
Never place waste battery packs in fire or dispose of them with domestic waste. They must be sent to the local collection center or
recycling center for recycling.
16
）
Before tightening screws or drilling holes in walls, floors or ceilings, carefully check whether wires, cables, natural gas pipelines or
water pipes are laid so as to avoid rupturing them with screws or drill bits.
17
）
It is necessary to wear ear protectors when using the tool. Failure to do so may result in hearing damage.
18
）
It is normal for accessories and metal parts to heat up when the machine tool is being used.
19
）
When the machine tool is in operation, it may make contact with concealed hidden wires. To avoid this, make sure you hold it
steadily by its insulation surface. Contact with live wires will electrify the metal on the surface of the tool and cause the operator to
suffer an electric shock.
Warning:
The battery pack leak liquid if the temperature is too high or it is overused. If the skin is stained with liquid from the battery
electrolytes, wash with soap and rinse with lemon juice or vinegar. If the liquid is splashed into the eyes, immediately rinse with
water and go to the hospital for examination and treatment.
Safety precautions for charger:
1
）
Please read the instructions carefully before use.
2
）
Use it only indoors. Do not expose it to rain or water.
3
）
Do not charge non-rechargeable batteries.
4
）
If the flexible power line is damaged, it shall be replaced by a professional technician from the manufacturer, its maintenance
department or similar department so as to avoid safety hazards.