Opera ons/Procedures/Forks/CAR BODY SAS FORKS Manual v2.pub 2/13/13 2/16/2013 2:50 PM
Page 17
www.sasforks.com
© 1995
‐
2013 S.A.S. of Luxemburg, Ltd. 1
‐
877
‐
SAS
‐
FORK
ANSWER PAGE 2
SAS™ 6’ & 7’ FORKS
S.A.S. of Luxemburg,Ltd. 133 Center Drive Hwy 54, PO Box 260, Luxemburg, WI 54217 USA
Phone: 920-845-2198
1-877-SAS-FORK
Fax: 920-845-2309
Web: www.sasforks.com
6) How can you prevent a vehicle from pping or falling o
ff
the forks?
Pick up the vehicle on the forks evenly, centering the load from right to le .
Tip the blades back about 5°._This will prevent the vehicle from falling o
ff
the end of the forks.
Drive the loader at a reasonable (slow) speed to prevent bouncing or jarring of the vehicle on
the forks, from bumps in the road.
7) Side handling vehicles have some risks to causing damage. What are items that are at risk which
you must be careful to avoid?
•Rear
drive
sha s
•Transfer cases
•Truck box sides
•Side door
•Rocker
panel
8) Which picture below correctly shows the posi on the forks should be placed in when sliding the
forks under a vehicle to load it on the forks?
A, B,
.
“A” is correct answer. Side loading requires fork to be close to and just behind front wheel.
·Note: This page can be photocopied for use with your machine operator training for SAS FORKS™.
X