Opera ons/Procedures/Forks/CAR BODY SAS FORKS Manual v2.pub 2/13/13 2/16/2013 2:50 PM
Page 4
www.sasforks.com
© 1995
‐
2013 S.A.S. of Luxemburg, Ltd. 1
‐
877
‐
SAS
‐
FORK
General Safety Guidelines and Precautions
SAS™ FORKS
(Page 4)
Operation of equipment by un-qualified or un-trained individuals can result in serious
injury or death. Verify all operators have received proper training on operation of
this equipment.
Operation of equipment under the influence of illegal, prescribed or over the counter
drugs can result in potential injury or property damage. Consult your physician
before operation of this equipment while on medication.
Inspect the device and perform all preventative maintenance before operation at the
start of every shift. Failure to perform inspections or proper maintenance can result
in equipment failure resulting in serious injury or property damage.
Read operators manual and follow all safety procedures for the equipment this
device is attached to. Failure to follow Manufacturers recommendations can result
in serious injury and property damage or death.
This equipment has numerous moving components. Do not wear loose fitting cloth-
ing, rings, jewelry or other items that may become entangled in the device. Be aware
of resulting pinch points and keep clear during operation, inspection and mainte-
nance. Pinch points exist between the coupler and forks, coupler and wheel loader,
failure to keep clear while in operation can result in serious injury or death.
Do not exceed posted weight limits on equipment or loader. Exceeding rated
load limits will result in equipment damage, serious injury or death.
S.A.S. of Luxemburg,Ltd. 133 Center Drive Hwy 54, PO Box 260, Luxemburg, WI 54217 USA
Phone: 920-845-2198
1-877-SAS-FORK
Fax: 920-845-2309
Web: www.sasforks.com
Operation of equipment should only be performed by qualified and trained individuals. All persons operat-
ing or working in the area of operation should read this manual and a copy of this manual should be kept
with the equipment.
To be considered qualified you must:
Understand the written instructions supplied by the manufacturer of this device, the manufacturer
of the wheel loader, all company rules and any applicable OSHA regulations
Completed training including actual operation of the device.
Know and follow the safety rules and regulations of the jobsite.
Know and follow all guidelines outlined in this manual.
