SAS Scalable Performance Data Server 4.5 Page 87 Administrator'S Manual Download

Page: 87 / 271

Server Manager

Overview of the Server Manager

The

Server Manager

folder in the SPD Management utilities in the SAS Management

Console window is used to refresh the server's configuration and to run selected SPD Server
utilities.

You must connect to an SPD Server host machine before you can use the SPD Management
utilities. For additional information, see

“Connecting to an SPD Server ” on page 73

provides detailed instructions on connecting to an SPD Server host.

Refresh Domains

Click

Refresh Domains

in the Server Manager to reload the current libnames.parm file.

The libnames.parm file describes the list of available domains.

Refresh Domains

Summary of Contents for Scalable Performance Data Server 4.5
















































































































































































































































































Search results

Summary of Contents for Scalable Performance Data Server 4.5

Reviews:

Related manuals for Scalable Performance Data Server 4.5

Brands by name

Popular brands

SAS Scalable Performance Data Server 4.5, Administrator'S Manual

Search results

Summary of Contents for Scalable Performance Data Server 4.5

Reviews:

Related manuals for Scalable Performance Data Server 4.5

Brands by name

Popular brands