SAS Scalable Performance Data Server 4.5, Administrator'S Manual

Page: 202 / 271

30
8. Enter the group name if the user is part of an ACL group, or skip this step by pressing
Enter . For example:
groupname
The user debby is added. The temporary password is good for one logon.
The second part changes the user's password. Change the user's password with the
NEWPASSWD= option. For example:
LIBNAME mylib sasspds "spdsdata"
host="bubba"
serv="5200"
user="debby"
password="temporarypassword"
NEWPASSWD="abc123"
Or, change the user's password with the CHNGPASS= option. For example:
LIBNAME mylib sasspds "spdsdata"
host="bubba"
serv="5200"
user="debby"
password="xyz123"
CHNGPASS=YES
The user will be prompted for a new password.
Add a New User and Set a Password for the User
The second method adds a new user to the password table using the psmgr utility. The
password expires immediately after the user is created. The SPD Server administrator
creates a new password for the user and sends it to him.
1. The SPD Server Administrator issues the CHGPASS command. For example:
chgpass debby
2. The SPD Server administrator enters Debby's old password. For example:
oldpassword
3. The SPD Server administrator enters Debby's new password. For example:
newpassword
4. The SPD Server administrator re-enters the new password for accuracy. For example:
newpassword
The SPD Server administrator can now inform Debby of her new password. The new
password expires in the number of days that was specified in step 7 of the previous section.
196
Chapter 15 • Managing SPD Server Passwords, Users, and Table ACLs