SAS Scalable Performance Data Server 4.5, Administrator'S Manual

Page: 243 / 271

-aonly
Only include the domain ACL files in the backup. No tables will be backed up.
-d
The SPD Server LIBNAME domain.
Note: The system that performs the backup must be able to access the physical path
for the domain locally or through a network connection.
-f
The prefix filename for the backup data file. This filename is concatenated with
_BK_ddmmmyyy_hhmmss.0.0.0.spds . The complete name identifies it as an SPD
Server backup file. If the backup file exceeds the system's file size limit, spdsbkup
automatically extends the file, separating it into multiple backup files with a unique
SPD Server filename extension (the "0.0.0" portion of the filenames will be different).
-fibfact <n>
Increase the File Information Block (FIB) metadata space by a factor of n, where n is
greater than or equal to 2. The
-fibfact
option is necessary only if a backup fails
due to insufficient file information block metadata space (fibspace). File information
block metadata space shortages occur when the domain that is being backed up contains
an unusually large number of data sets.
-full
Performs only full backups of SPD Server tables. All of the table observations and
attributes (indexes, definitions, partition size, compression and sorted) are backed up.
After each full table backup, it resets the last full backup date for the table. See the
-
n
option for dependencies.
-h
The SPD Server host to use for the backup.
-hash
Prints the hash sign (#) to stdout for each 256K block that is compressed and written
to the backup file.
-help
Prints the command-line usage syntax and option switch list for the spdsbkup utility.
-inc
Performs incremental backups of the SPD Server tables.
-n
Does not save index information for SPD Server tables when performing full backups.
When the table is restored, the restore utility does not create indexes. Note that the
index itself is not backed up, only the definition of the index is.
-nv6warn
Suppresses the 'Cannot back up v6 data set' warning. Spdsbkup 4.5 can only back up
SPD Server and SPD Server data sets. Attempting to back up earlier versions of SPD
Server data sets results in a warning message unless the
-nv6warn
option is invoked.
-p
The user password.
-proj <dir>
The domain project directory.
-q
Runs spdsbkup in quiet mode, which outputs only error messages and warning
messages during a backup operation.
Backup Options
237