SAS Scalable Performance Data Server 4.5, Administrator'S Manual

Page: 50 / 271

Select Automatic from the Startup type list. This configures the Name Server service to
automatically start and stop with the Windows operating environment. Select OK to apply
the changes and close the window.
Repeat this process to change the Startup type setting for the Data Server and SNET
Server. At this point, your Name Server, Data Server, and SNET Server services are
configured to automatically start and stop with the Windows operating environment.
The first time you set your SPD Server services to Automatic , you need to manually start
them by selecting Start
ð
Programs
ð
SAS
ð
SPD Server 4.5
ð
Start SPD Service .
After you do that, the Name Server, Data Server, and SNET server automatically start and
stop with Windows.
Configuring SPD Server Software on Your
Windows Host
After you validate port and library assignments and start the Name Server and Data Server,
you can begin configuring the LIBNAME domains and user password files.
1. You must configure the libnames.parm file with all of the LIBNAME domains that you
use to store SAS tables and catalogs. Declaring all of your LIBNAME domains requires
thought and planning and best exploits the parallel processing capabilities of SPD
Server. For more information about the format of the libnames.parm file, see
“ SPD
Server Command Reference” on page 48 and the libsamp.parm file in
InstallDir
\
. Any changes that you make to the libnames.parm file when SPD Server is running
do not take effect until SPD Server is stopped and restarted.
44
Chapter 4 • SPD Server Windows Installation Guide