SAS Scalable Performance Data Server 4.5, Administrator'S Manual

Page: 19 / 271

• If your SPD Server clients access the SPD Server host using name services instead of
specifying port numbers, you need Write access to the services files on the clients, in
the path
/etc/services
or
/etc/inet/services
For Windows, the path is
C:\winnt\system32\drivers\etc\services
• Insert the WORKPATH= server option in your spdsserv.parm file. Use the
WORKPATH= option to configure your server to use a high-performance file system.
Ideally this system has RAID-structured volumes with sufficient disk space to
accommodate the transient storage needs for Server. The spdsserv.parm file is located
in the root directory of your SPD Server host installation. For more information about
the WORKPATH= option and configuring servers for performance, see the
SAS
Scalable Performance Data (SPD) Server 4.5: User's Guide.
Packing List for SPD Server Distribution
Directory Contents
Directory names in the packing list are subdirectories of your SPD Server host installation
directory, whose path is represented by
InstallDir/
.
Note:
InstallDir/
represents the root directory where SPD Server is installed.
The
bin/
subdirectory contains the following binary files:
• spdsnsrv is the SPD Server Name Server.
• spdsserv is the SPD Server host.
• spdsbase is the LIBNAME proxy.
• spdslog is the message logger.
• spdsaud is the audit logger.
• spdseng is the SQL Pass-Through engine.
• ixutil is the data set index utility .
• psmgr is the password file utility.
• spdssnet is the ODBC, JDBC, and htmSQL gateway,
• spdsperf is the Performance server.
• spdsls gives physical file listings for a LIBNAME domain.
• spdsbkup performs full or incremental table backups.
• spdsrstr restores full or incremental table backups
• spqldrive is a stand-alone SQL Pass-Through driver.
• spdsconv is the SPD Server 3. x to SPD Server 4. x table conversion utility.
• spdsclean is the SPD Server disk cleanup utility.
• dulibv3 is the SPD Server 3. x 64-bit version of the shared library used by spdsconv.
The dulibv3 file is included only if your system previously supported SPD Server 3. x
tables.
• spdsbased is the debug version of spdsbase.
• spdsengd is the debug version of spdseng.
Directory Contents
13