Sartorius Factory Series, Operating Instructions Manual, Page: 72 / 213

72
Preparation: FCA Models
Set the parameters for calibration and adjustment; e.g., with manual calibration/adjustment, isoCAL off
Step Press key(s) Display/Output
(or follow instructions)
1. Switch on the scale, e Sartorius logo and self-test
if not already on
2. Select the Setup menu M
3. Select “Balance/scale functions”
O
soft key
4. Select “Calibration/adjustment”
O
soft key
5. Select CAL/isoTST key function
O
soft key
o
= last setting selected
6. Select desired function and
Q
soft key, repeatedly,
confirm (e.g., “Ext. cal./adj.; if necessary
l
soft key
factory-def. wt.”)
7. Exit CAL/isoTST key function
o
soft key
8. Select “Cal./adjustment sequence”
q
soft key