Sartorius Factory Series, Operating Instructions Manual

Page: 131 / 213

131
Operating the Scale
Preparation
●
Turn on the scale: press e
> The Sartorius logo is displayed
● Select the “Statistics” application in the Setup menu: press M
FC Models:
§ Select the Application menu:
App
soft key
§ Select
Application 3
: Press the
q
soft key and then the
O
soft key
FCA Models:
● Select
Application parameters
: press the
q
soft key 2 x,
then the
O
soft key once
● Select
Application 3 (data records)
:
press the
q
soft key 2 x, then the
O
soft key once
● Select
Statistics
: press the
Q
or the
q
soft key
● Select
Statistics
: press the
O
soft key
Statistics Automatic
ο
Off
storage On, first value at stability
On, last value at stability
On, value bet. 70 - 130% at stabil.
Minimum load for None
automatic storage
ο
10 digits
20 digits
50 digits
100 digits
200 digits
500 digits
1000 digits
Source of data for
ο
Application 1
auto storage Application 2
Evaluated values
ο
Net
Calculated
Net + calculated
Evaluated mode,
ο
Intermediate evaluation, print
MR function Final evaluation, print
Intermediate evaluation, d print
Final evaluation, d print
M+/M– function,
ο
Off
then tare On
Printout of individual No
components
ο
Yes
ο
= factory setting
see also the “Application Parameters (Overview)” in the chapter entitled
“Configuring the Scale”
● Save settings and exit the Setup menu: press the
oo
soft key
Additinal Functions
In addition to the functions for:
– alphanumeric input,
– taring (not during
alphanumeric input),
– printing,
you can also access the following
functions from this application:
Calibration/Adjustment
● Press the
isoTST
soft key
> See “Calibration/Adjustment”
for further instructions
Toggling to Another Application
● Press D
> See the section on the correspon-
ding application program for
further instructions
Setup (Setting Parameters)
● Press M
> See “Configuring the Scale” for
further instructions
Turning Off the Scale
● Press e
> The scale shuts off
> The display goes blank, then
OFF or Standby is displayed with
backlighting