Sartorius Factory Series, Operating Instructions Manual, Page: 164 / 213

164
Line Format (Data Output Format)
You can output the values displayed
in the measured value line and
the weight unit with or without a
data ID code
Example: Without data ID code
+ 253 pcs
Example: With data ID code
Qnt + 253 pcs
Configure this parameter in the
Setup menu (Setup: Basic settings:
Printout configuration: Line format).
The output with data ID code has
16 characters; without data ID code,
22 characters.
Output Format With 16 Characters
Display segments that are not activated are output as spaces. Characters
without a decimal point are output without a decimal point.
The following characters can be output, depending on the characters
displayed on the scale:
Normal Operation
Position 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
+ * D D D D D D D D * U U U CR LF
or – . . . . . . . . * * *
or * * * * * * * * *
*: Space
D: Digit or letter
U: Unit symbol
CR: Carriage return
LF: Line feed
Special Codes
Position 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
* * * * * * – – * * * * * * CR LF
or H H
or L L
or C
*: Space
– –: Weight
H: Overload
H H: Overload in checkweighing
L: Underload
L L: Underload in checkweighing
C: Calibration/adjustment
Error Codes
Position 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
* * * E r r * */# # # * * * * CR LF
*: Space
# # #: Error code number