48 Cubis
®
MCA Operating Instructions
System Settings
Parameter
Settings
Explanation
Stability delay
Very short
Sets the stability delay to “very short”: The stability symbol is displayed
after the stability criterion is reached .
Short*
Sets the stability delay to “short”: The stability symbol only appears after a
short delay in order to provide a reliable result despite fluctuations .
Medium
Sets the stability delay to “medium”: The stability symbol only appears
after a longer delay in order to provide a reliable result in case of higher
fluctuations .
Long
Sets the stability delay to “long”: The stability symbol only appears after a
long delay in order to balance out major instability .
Zeroing / Taring
Without stability
Without stability: The function of the [Zero] or [Tare] key is executed
immediately once the key is pressed .
After stability*
After stability: The function of the [Zero] or [Tare] key is only executed
after stability is achieved .
At stability
At stability: The function of the [Zero] or [Tare] key is executed if stability
exists when the key is pressed .
Automatic zeroing
On*
Activates automatic zeroing . The display is automatically set to zero in case
of a deviation of 0 less than (X) .
Off
Deactivates automatic zeroing . Zeroing must be triggered with the [Zero]
key .
Preset tare 1
On*
Activates the second tare memory (preset tare) .
Off
Deactivates the second tare memory (preset tare) .
Available units
The availability of units may depend on national legislation and is
therefore country-specific . Multiple selection is possible .
mg – milligrams
The device displays the weight in milligrams .
g – grams*
The device displays the weight in grams .
kg – kilograms
The device displays the weight in kilograms .
ct – carats
The device displays the weight in carats .
oz – ounces
The device displays the weight in ounces .
lb – pounds
The device displays the weight in pounds .
ozt – troy ounces
The device displays the weight in troy ounces .
tlh – Hong Kong taels
The device displays the weight in taels (Hong Kong) .
tls = Singapore taels
The device displays the weight in taels (Singapore) .
tlt – Taiwanese taels
The device displays the weight in taels (Taiwan) .
tlc = Chinese taels
The device displays the weight in taels (China) .
GN – grain
The device displays the weight in grains .
dwt = pennyweight
The device displays the weight in pennyweights .
mom – mommes
The device displays the weight in mommes .
tol – tolas
The device displays the weight in tolas .
bat – baht
The device displays the weight in baht .
MS – mesghals
The device displays the weight in mesghals .
N – newtons
The device displays the weight in newtons .
* Factory setting for the “Standard Weighing” factory-set weighing profile
Summary of Contents for Cubis MCA10202S Series
Page 2: ......
Page 85: ...Cubis MCA Operating Instructions 85 Conformity Documents...
