Sartorius Cubis MCA10202S Series, Operating Instructions Manual

Page: 42 / 89

42 Cubis
®
MCA Operating Instructions
System Settings
7 System Settings
7.1 Performing System Settings
Default settings can be adjusted for the device and the applications in order to align
with the ambient conditions and individual operating requirements .
The following settings are necessary to operate the device together with connected
components:
− Set up the communication of the connected devices
− Set up additional components
The following settings are recommended to set up the device:
− Set the menu language
− Select date / time format
− Set date / time
− Assigning a Password
− Set the behavior of the isoCAL function
Procedure
t
Open the main menu .
t
Press the [Setup] button .
t
To adjust settings: Open the desired submenu .
t
Select the desired configuration value (configuration values, see Chapter “7 .5
Parameter List”, page 45) .
t
Exit the menu .
7.2 Switching Off the isoCAL Function
If the isoCAL function is switched off for a conformity-assessed device: The device
can only be used for legal-for-trade applications in restricted temperature ranges
(see Chapter “15 .2 .2 Ambient Temperature for the isoCAL Function”, page 75) . The
isoCAL function
cannot
be switched off for all model versions .
Procedure
t
In the “Settings / Device Settings / isoCAL” menu, for the “isoCAL function”
parameter, select the “Off” configuration value .
7.3 Assigning a Password
Procedure
t
Log into the device using the user profile; a password should be assigned .
t
Open the “Settings / User Management” menu .
t
Press the [Lock] button .
y
The user password input field is displayed .
t
Enter the desired password in the entry field and confirm with the [OK] button .