58 Cubis
®
MCA Operating Instructions
Operation
8 Operation
8.1 Switching the Device On and Off
The device only delivers accurate values if it has reached the necessary operating
temperature . The warm-up time after switching the device on must therefore be
complied with .
If the device is being switched on for the first time or if the device is switched on
after being reset to factory settings: The Setup Wizard opens . All steps in the Setup
Wizard must be completed .
Requirements
The device is connected to the power supply .
Procedure
t
If the device does
not
switch on automatically after it is connected to the power
supply: Press the ON key on the weighing module .
t
NOTICE
Pointed or sharp-edged objects may damage the operating display!
Touching the operating display with objects, such as pens, may damage the
touchscreen surface of the operating display . Only touch the operating display
with your fingertips .
t
If the Setup Wizard is shown: Follow the instructions in the Setup Wizard in the
operating display .
t
If the login display is displayed: Log into the device using a user profile .
y
If the device is switched on after the Setup Wizard is complete and
no
passwords
have been assigned for the user profiles: The user profile for the last user to be
logged in is loaded .
t
To allow the device to reach the necessary operating temperature to accurately
determine the weight: Comply with the warm-up time of 30 minutes after
switching the device on .
y
If this relates to a conformity-assessed device: The weight value is marked as
invalid
during the warm-up period .
t
To switch the device off: Disconnect the device from the power supply .
8.2 Logging Users In and Out
Procedure
t
If the name of the desired user profile is displayed in the entry field (1) of the
login display: Press the [Login] button .
t
If the name of the desired user profile is
not
displayed in the entry field of the
login display:
t
Tap on the entry field in the login display .
y
The user selection opens .
t
Press the name of the desired user profile .
t
If a password has been assigned for the desired user: Enter the password in
the entry field and press the [OK] button .
y
The user profile opens and the main menu or the last task being performed by
the active user is displayed .
t
To log out the active user profile from the device: Press the [Log-out] button .
1
Summary of Contents for Cubis MCA10202S Series
Page 2: ......
Page 85: ...Cubis MCA Operating Instructions 85 Conformity Documents...
