42
Display
Cause
Solution
e 22
The weight is too light
Increase the reference
or there is no sample
sample quantity
on the weighing pan
e 30
The interface port
Set code to reset menu or
for printer output
contact your local
is blocked
Sartorius Service Center
The weight readout
Unstable ambient
Set up the scale in
changes constantly
conditions (too much
a different area or
vibration or the scale)
change the menu setting
is exposed to a draft)
to adapt the scale
A foreign object is
Remove the foreign
caught between the
object
weighing pan and
the scale frame
The weight readout
The scale was not
Calibrate/adjust the scale;
is obviously wrong
calibrated/adjusted;
zero before weighing
the scale was not
zeroed before weighing
If any other errors occur, please contact your local Sartorius service center:
for a list of the addresses, please visit our Internet website at: http://www.sartorius.com
