4
Warnings and Safety Precautions
The scale has been constructed in
accordance with the European Directives
as well as international regulations and
standards for operation of electrical
equipment, electromagnetic compatibi-
lity, and stipulated safety requirements.
Improper use or handling, however, can
result in property damage or personal
injury.
Read these operating instructions
thoroughly before using your scale
to prevent damage to the equipment.
Keep these instructions in a safe place
for future reference.
Follow the instructions below to ensure
safe and trouble-free operation of your
scale:
!
Do not use this scale in a hazardous
area/location
!
Only for use with LISTED direct plug
in power supply.
!
CAUTION. Risk of explosion if battery
is replaced by an incorrect type.
Dispose of used batteries according
to the instructions.
!
Make sure that the voltage rating
printed on the AC adapter is identical
to your local line voltage
!
Warning When Using Prewired RS-232
Connecting Cables:
RS-232 cables purchased from other
manufacturers often have incorrect
pin assignments for use with Sartorius
scales. Be sure to check the pin assign-
ment against the respective chart before
connecting the cable, and disconnect
any lines marked “Internally Connected”
(e.g., pin 6). Failure to do so may
damage or even completely ruin your
scale and/or peripheral device.
– The only way to turn the power
off completely is to disconnect the
AC adapter
– The scale housing is protected against
penetration (ingress) of solid objects
(IP30)
– Connect only Sartorius accessories and
options, as these are optimally designed
for use with your CB scale
– Protect the AC adapter and the scale
from moisture
When cleaning your scale, make sure
that no liquid enters the scale housing;
use only a slightly moistened cloth
to clean the scale.
Do not open the scale housing.
In case you have any problems with
your scale:
$
Contact your local Sartorius office,
dealer or service center
