Sartorius Stedim Biotech MD8 airscan, Operating Instructions Manual, Page: 51 / 57

| 51
11. Accessories and consumables
11.1 Accessories for MD8 airscan
17655 Filter holder
17656 Filter stack (10 filter holders, individually numbered)
17657 Set of connectors (consisting of 17658 and 17659)
17658 Connector (air sampler inlet to flexible hose)
17659 Connector (flexible hose to filter holder/adapter)
17208 Carrying case for MD8 airscan
17085 Flexible PVC hose with reinforced ends (2 m)
17088 Flexible PVC hose with reinforced ends (5 m)
17662 Silicone tubing, sterilizable (1 m, state length required)
16970 Support stand
16976 Clamp holder for 16970
17037 Clamp for 16970
17801 Adapter for gelatin filter units
17016 Adapter (DN 25 hose barb to 1”–1 1 ” Sanitary flange) to connect
MD8 airscan to an isolator via silicone tubing and a filter capsule
17030 Adapter (DN 30 hose barb to 1”–1 1 ” Sanitary flange) to connect
MD8 airscan to an isolator via flexible PVC hose and filter capsule
17033 Clamp for 1”–1 1 ” Sanitary flanges
5181307T9-SS Sartofluor Capsule with PTFE membrane and Sanitary flange inlet
and outlet, for sterile air filtration inserted between the MD8 airscan
and isolator.
1ZE-0003 Remote control (Interface) for MD8 airscan designed for PLC units.
1ZE-0004 Remote control for MD8 airscan for use with PC (dialog system
software)
Further accessories like the calibration unit 16756 on request.
Details on further accessories, e.g. for installation of the filter holder remote from the
MD8 airscan in isolators, and for calibration of the MD8 airscan, on request.