Sartorius Stedim Biotech MD8 airscan, Operating Instructions Manual, Page: 43 / 57

10. How to use 80 mm gelatin filters in the aluminium filter holder
and the filter stack
10.1 Preparation and sterilization of the filter holder
The filter holder supplied consists of a top and a bottom part (Fig. 20). The top part fits on the
bottom part by turning it clockwise all the way to the stop. Before first use, clean the parts
with hot water. If necessary, add a little gentle laboratory detergent and rinse subsequently
with hot water. Use distilled water for a final rinse. Dry the parts with hot air and assemble the
filter holder.
Fig. 20
| 43