9.2 How to remove a filter unit with the adapter
After sampling, detach the adapter holding the filter unit by turning it counterclockwise
(Fig. 13). Hold the adapter and base of the filter unit firmly and with the filter face up,
then detach the top part of the filter unit by turning it counterclockwise (Fig. 14).
Invert an agar-filled petri dish base over the gelatin filter (Fig. 15), and make contact so that
the gelatin filter can adhere to the agar surface (Fig. 16). Put the lid on the petri dish.
The gelatin filter starts to dissolve and become transparent (Fig. 17) because of the moisture
in the agar, and is completely dissolved within a few minutes. (Fig. 18)
Fig. 13
| 35
Summary of Contents for MD8 airscan
