Sartorius Stedim Biotech MD8 airscan, Operating Instructions Manual, Page: 33 / 57

With a triple-packaged filter unit, cut open the outer bag on the side where the seam is
located, open the middle bag at the zip-lock seam and cut open the innermost bag on the
side where the seam is located.
Remove the filter unit by hand, touching only the outer edge of the unit (Fig. 11), and lock it
onto the adapter which is either subsequently attached, or was previously attached, to the
MD8 airscan (Fig. 12) inlet or to a hose connector. While doing this, avoid contamination of
the filter, or damage to it, by not allowing the open filter face to contact anything.
Fig. 11
| 33