Appendix 39
9 Appendix
9.1 Copyright
Parts of the device are patented . No part this device may be reproduced, distributed,
translated or transferred, in any form or through any means, electronically or
mechanically, including photocopying, recording or saving to an information storage
and retrieval system, without the previous written approval of Sartorius Stedim
Biotech GmbH .
9.2 Disposal
The manufacturer disposes of the BioWelder
®
TC .
The device must be decontaminated before being sent back to Sartorius Stedim
Biotech.
9.3 Technical data
Type designation
BioWelder
®
TC, BWTC
Power connection
100 VAC – 240 VAC
Input frequency
50/60 Hz
Power input
300 VA
In and out connections
Device plug C14 max . 250VAC
Ethernet jack type RJ45
Power connection of fuse
2 × 3 .15 A T (Type FST)
Battery
CR2032
Operating temperature
+5°C – +40°C *
Place of use
Indoor (Laboratory)
Transient overvoltage
Overvoltage category II
Pollution degree
2
Altitude
up to 2000 m
Humidity
80% up to 31°C, linearly diminishing to 50%
relative humidity at 40°C, not condensing
Degree of protection
IP20
Weight
16 .4 kg
External size (L × W × H)
555 mm × 261 mm × 269 mm
Power cord
According to local regulations
minimum 3 × AWG18 or 3 × 0 .75 mm
2
minimum local mains supply voltage
* The device is programmed with standard parameter sets for welding C-Flex
®
374,
AdvantaFlex
®
, PharMed
®
BPT and SaniPure™ BDF™ .
These parameter sets have been validated at room temperature .