22
INVERT
Press the Warm or Cool button followed by the Jets 3 (Blower) button to change the
numbers of the display to read upside down.
FREEZE PROTECTION
If the temperature sensors detect a drop to 44ºF (approximately 6.7ºC) within the heater,
the pump will automatically activate to provide freeze protection. The equipment stays on
until 4 minutes after the sensors detect that the spa temperature has risen to 45ºF (approxi-
mately 7.2ºC) or higher. In colder climates, an optional additional freeze sensor may be
added to protect against freeze conditions that may not be sensed by the standard sensors.
Aux. Freeze sensor protection acts similarly except with the temperature thresholds
determined by the switch and without a 4-minute delay in turnoff. See your dealer for
details.
Note:
Saratoga spas are designed for maximum heat retention. The unit is not designed to
cool water. If the set or desired temperature is below that of the ambient temperature, the
unit will not be able to achieve this demand. Depending on the desired temperature, it may
be necessary to add cool water to the unit to lower your spas water temperature.
Locking Featur es
There are two locking features: Minor temperature Lock and Major Spa panel Lock. The
locking features are enabled from the main control panel. Once a locking feature is enabled,
that particular locking feature will remain until cancelled by the user.
MAJOR SPA PANEL LOCK
The Major Spa Panel Lock feature freezes all buttons except the Time button. To activate the
Major Spa Panel Lock, press Time, Jets 1 and Warm buttons within 3 seconds. When locked,
the PL indicator will light. To deactivate the Major Spa Panel Lock, press Time, Jets 1 then
Cool buttons.
MINOR TEMPERATURE LOCK
The Minor Temperature Lock feature deactivates the temperature Warm or Cool buttons
from the main control panel. All other functions on the main control will operate as normal.
To activate, press Warm or Cool then Time, Jet 1 and Warm within 3 seconds. The TL
indicator will light when the set temperature is locked. To unlock the set temperature, press
Warm or Cool then Time, Jet 1 and Cool.
PL - Panel Lock
TL - Temperature Lock
