10
I
Initial Operating Instructions:
Start-Up and Refill Pr ocedur es
Your Saratoga Spa has been tested at the manufacturing plant to ensure that all the spas
functions operate. During the test procedure, a small amount of water may have remained in
the spas plumbing. Through the shipping process water may have spotted the spas shell. You
may need to wipe down the shell with a soft cloth. Please read and follow the start-up
instructions to ensure a successful start-up or refill.
CAUTIONS
• Inspect and clean spa shell from any debris
• Do not turn power on to spa unless filled with water to appropriate level. The spa pack
must never be operated without water in the spa; serious damage to the heater and/or
pump(s) may result.
• Do not fill spa with water before checking the items below (below items may become loose
in transit):
a) Hand tighten unions at the pumps
b) Tighten drain valve
Note:
Drain Valve is
left open for shipping -
drain valve must be closed
before filling spa.
c) Tighten unions on heater
• Do not fill spa with hot water. This may cause a false error code to the high limit sensor.
A
A
C
C
