5
The Sapling Company, Inc.
670 Louis Drive
Warminster, PA 18974
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
Clock Programming - SDLG
The SDLG Messaging clocks come preprogrammed with 15 default messages and settings. These can be
customized at the time of purchase or with the USB Programming Cable.
The 15 preprogrammed messages are shown below:
If the manufacturer default messages and clock settings are meeting the user’s needs, then the installer
can proceed to the installation instructions section of this manual.
If the user desires to change one or more messages, or any of the additional clock settings such as:
brightness schedules, alternating between time and date, etc., then there is a need to program each clock
prior to installing it on the wall.
This section includes instructions on how to set and program each clock with the user’s preferences.
For doing so, there is a need for the USB Programming Cable
(D-USB485-INTF-1)
, which is an optional
accessory provided along with the USB programming software.
Sapling can also provide an optional service of programming the SDLG Message Clocks with the
consumer’s desired messages, as well as the other settings
BEFORE
clocks are shipped out. This eliminates
the need for the user to program upon receiving the clocks.
