SECTION 5
74
SAPPHIRE SCIENTIFIC MODEL 370 SS
®
PART#
49-038 REV F
Fuel Line Bulkhead Installation (Inside Vehicle)
1.
Select an appropriate location on the vehicle floor away from operator or maintenance traffic and away from contact
with any accessories or tools while in use or transit. Make sure your hole is within adequate reach of the supplied
hose in the finished assembly.
2.
Drill a 3/4 inch hole through the vehicle floor at the location chosen for the bulkhead connector.
3.
Install the bulkhead connector by inserting the fitting and tightening the nut and lock washer on the opposite side of
the vehicle floor.
4.
Inside the vehicle, attach the hose barb fitting and connect the fuel line from the console.
5.
Drill a 1/2 inch hole nearby the bulkhead fitting for the fuel pump electrical extension harness to pass through.
Figure 1. Fuel Line Bulkhead Assembly
Summary of Contents for 370 SS
