USING THE MENU SCREEN
MOTION/EXAMPLE
Motion detector setting example
After the camera has been connected to the peripheral devices (VCR, multiplexer, etc.) set the
MOTION
item to send an alarm trigger to the peripheral devices when the set movement
parameters are met.
Checking the detected movements set by the MOTION item
If the
MOTION
item settings are not made properly, the desired results will not be obtained. To test
for correct detection, please proceed as follows.
There are two setting checking methods, using the
ADJUSTMENT FOR MOTION
screen
ZOOM
or
ALARM SIGN
.
A) The image is zoomed in when a movement is detected
Set the
ZOOM
item to
5S
. When the motion detector senses a movement from a subject on the
screen, the image is zoomed in.
B) The camera ID flashes on-screen when a movement is detected
Set the
ALARM SIGN
item to
ON
, then exit the menu screen. When the motion detector senses
a movement from a subject on the screen, the camera ID is displayed on-screen.
Note:
The camera ID will not be displayed while a menu is displayed on-screen.
CAMERA 1
L53R4/US GB 1999, 12, 7
46
English
