USING THE MENU SCREEN
SYNC/L-L
B
Power supply synchronization setting (L - L)
When using a camera switcher to connect 2 cameras or more to one monitor, there may be a
vertical roll of the images when switched. In such a case, set as described below.
1
Press the CURSOR (
l
, then
d
or
c
) button to change the SYNC setting to “L - L”
(the setting will flash), then press the SET button.
The
ADJUSTMENT FOR L - L
screen will be displayed.
2
Switch the display on the monitor from camera 1 to camera 2.
Press the CURSOR (
d
or
c
) button to adjust the vertical sync phase.
☞
Returning the value to the default setting
Press the
CURSOR
(
l
, then
d
or
c
) button to change the
PRESET
setting to
ON
, then
press the
SET
button.
3
When finished:
Press the
CURSOR
(
l
) button to select
BACK
(it will flash) at the bottom of the screen.
Then press the
CURSOR
(
d
or
c
) button to change
BACK
to
END
, and press the
SET
button.
☞
To return to the previous screen, select BACK then press the SET button.
Note:
Power supply synchronization setting is not possible when a 12 V DC power supply is
being used.
PRESET ON
OFF
CURSOR
SET
MAIN MENU
LANGUAGE SET p
CAMERA ID OFF
SYNC L-L p
SET
CURSOR
ADJUSTMENT FOR L-L
[V SYNC PHASE]
í--ú---z------ü 110
CURSOR
MENU BACK
CURSOR
SET
MENU END
L53R4/US GB 1999, 12, 7
English
19
