USING THE MENU SCREEN
AI/SENSE UP•EI
SENSE UP setting
Press the
CURSOR
(
l
) button so that the
SENSE UP
setting is at
OFF
and is flashing, then press the
CURSOR
(
d
or
c
) button to set the
exposure time.
The basic exposure time is 1/60 second (
SENSE UP
set to
OFF
), and
the setting can be changed to X2, X4, X8, X16 or X32.
Note:
•
When the
MOTION
item is set to
ON
, the
SENSE UP
setting is not
possible.
•
When filming moving subjects, the higher the
SENSE UP
setting
(sensitivity), the more pronounced afterimage will be visible. Also,
when the sensitivity is high, white dots will be visible on the screen,
this is due to the CCD characteristics.
B
EI (Electronic Iris) mode setting
The
EI
mode setting is the same as for the
AI
mode setting with a DC
type lens, please refer to page
22
.
1
Press the CURSOR (
l
, then
d
or
c
) button until “EI” in the
IRIS item is flashing, then press the SET button.
The
ADJUSTMENT FOR EI
screen will be displayed.
2
Press the CURSOR (
l
, then
d
or
c
) button to select MULTI or
EVAL for the BLC (backlight correction) setting.
Note:
•
When the electronic iris function captures a very bright subject (such as a
light, etc.), the quantity of light entering the lens cannot be adjusted, and
image smearing and other conditions may appear. In such a case, this can
be prevented by changing the lighting angle or using an auto-iris lens.
•
The
EI
mode setting is used for indoors only.
•
If the camera location lighting if fluorescent, it will be scattered by the
subject. To prevent this, it is recommended to change to incandescent
lighting.
ADJUSTMENT FOR AI
LENS TYPE DC
BLC OFF
SENSE UP OFF
CURSOR
OFF
➞
X2
➞
X4
➞
X8
➞
X16
➞
X32
MAIN MENU
LANGUAGE SET p
CAMERA ID OFF
SYNC INT
IRIS EI p
ADJUSTMENT FOR EI
BLC EVAL
p
SENSE UP OFF
SET
SET
MULTI
p
OFF
L53R4/US GB 1999, 12, 7
English
27
