USING THE MENU SCREEN
MOTION/SENSITIVITY
D
SENSITIVITY setting
The smaller the setting value, the greater the sensitivity.
Press the
CURSOR
(
l
) button to select the
SENSITIVITY
setting “
SET
” (the setting will flash),
then press the
SET
button.
The
SENSITIVITY
screen will be displayed.
MOVE
This sets the movement amplitude of subjects on the screen.
Press the
CURSOR
(
d
or
c
) button so that the
MOVE
value is flashing.
(Maximum: 6)
Set the value to a large to avoid detecting slight movement such as movement caused by the wind.
Y-LEVEL
This sets the brightness level. Any signal darker that the set brightness will be ignored.
This is mainly used to avoid incorrect detection caused by electronic noise in a dark
picture.
Press the
CURSOR
(
l
, then
d
or
c
) button so that the
Y-LEVEL
value is flashing.
(Maximum: 10)
Set the value to a large to avoid incorrect detection of movement caused by electronic noise
from a dark picture.
Y-DIFFER
This sets the brightness change level. A lower setting will ignore bigger changes in the
brightness.
Press the
CURSOR
(
l
, then
d
or
c
) button so that the
Y-DIFFER
value is flashing.
(Maximum: 10)
This allows movement to be detected when there are variations in brightness. Set the value to a
large if lights being turned on and off are not to be detected.
ADJUSTMENT FOR MOTION
DIRECTION OFF
SIZE SET p
MASKING ON p
SENSITIVITY SET p
CURSOR
SET
CURSOR
SET
SENSITIVITY
MOVE í---ú----ü 3
Y-LEVEL í-ú------ü 3
Y-DIFFER í------ú-ü 8
DURATION ú--------ü 1
L53R4/US GB 1999, 12, 7
English
43
