Sanyo SCP-2400, User Manual

Page: 72 / 256

56 Section 2B: Controlling Your Phone’s Settings
Alert Notification
Your phone can alert you with an audible tone when you
change service areas, once a minute during a voice call, or
when there are incoming or missed Sprint PCS Ready Link
calls.
To set alerts:
1.
Select > Settings > Sounds > Alerts .
2.
Select your desired option and press .
䡲
Service sets an alert to notify you of network services
parameter changes.
䡲
Ready Link sets an alert to notify you of Ready Link
calls. Select Ready Link Calls for incoming
Sprint PCS Ready Link calls or R-Link Missed for
missed Sprint PCS Ready Link calls.
䡲
Voicemail sets an alert to notify you of voice
messages. Select Ringer Length to set the ringer
length of Voicemail notification.
䡲
Messaging sets an alert to notify you of Text, Picture
Mail or SMS Voice messages. Select Ringer Length to
set the ringer length of Messaging notification.
䡲
Minute Beep sets a minute reminder that beeps 10
seconds before the end of each minute during a call.
䡲
Signal Fade sets an alert to notify you when your
phone loses a signal during a call.
3.
Use your navigation key to select a setting and press .
Tip:
You can select Once or Repeat Alert if you select Ready Link Calls, R-Link
Missed, Voicemail, or Messaging. Repeat Alert sounds an alert every two
minutes for 20 minutes. (For Ready Link Calls, an alert sounds for 20
seconds continuously.)
SCP_2400 UG-P000_126.qxd 06.4.14 4:34 PM Page 56