Sanyo POA-MD13NET2, Owner'S Manual

Page: 171 / 176

83
Network Board
OWNER’S MANUAL
ENGLISH
Why can't I change the controls in the setting page with web browser?
Please make sure the projector is turned on. If it is in the standby mode, the
setting is not effective to the projector. To control the projector with a web
browser, the projector must be in the powered-on condition. Also, projectors
registered for multi-control cannot have any controls changed if they are in
standby mode. But timer and clock settings are always effective, even for pro-
jectors in standby mode.
Why does it sometimes take a lot of time to complete the page dis-
play?
The display speed of the page depends on the network environment in which
both the projector and computer are placed. It may take much time to complete
the page display if network traffic is heavy. Please consult your network admin-
istrator. By changing the preference of your web browser to “not show pic-
tures”, you may have page display more quickly at the heavy network traffic.
Please see the browser’s on-line help for further information. Also you can
select the Text mode for displaying pages quickly (
☞
p.22).
I use many of the projectors in the network. How can I use names of
the projectors to recognize each projector instead of IP addresses?
You can manage the projectors with nicknames instead of the IP address.
Please see chapter “Control the Multi-Projectors” for further information (
☞
p.51).
By registering the projector name and IP address with the DNS server, it can be
accessed with the nickname from the any computer referred to the DNS serv-
er. Please consult your network administrator (
☞
p.27, 53).
How many numbers of the E-mail addresses can I register in the E-
mail setting page.
You can register up to 10 addresses.
A
Q
A
Q
A
Q
A
Q
Operation
Q&A