Sanyo POA-MD13NET2, Owner'S Manual

Page: 59 / 176

59
Network Board
OWNER’S MANUAL [HD Series]
ENGLISH
Load and apply the setting value
The control sets saved for each projector (
☞
p.50) can be used while the multi-con-
trolled projectors function is being used. Select a setting number from the item Load
Setting No. with the pull-down menu button and then click Set button. The control
values stored with selected set number for each projector will be applied to the indi-
vidual projector assigned to that set. The control values will not be applied to all of
the projectors under the multi-control.
Control
Display the control page by clicking Multi Control sub
menu tab. The setting pages are constructed from 1 to
7 page and each item is indicated on the next page.
Control
z
✐
If loading a set to the multiple projectors, the contents of the set must be effective to current
accessed projector. If not, the multi-control can not be performed.
Example: If the DVI computer input for INPUT1 is set into the “Set1” and the current
accessed projector has a video board on the INPUT1, the load set will become
invalid this time and the loading of set for the another projectors will not be carried
out.