manualshive.com logo in svg

Sanyo POA-MD13NET2, Owner'S Manual, Page: 95 / 176

Share
Download
Sanyo POA-MD13NET2 Owner'S Manual Download Page 95

7

Network Board

OWNER’S MANUAL

ENGLISH

Features

Multi-control function

A single computer can control and set up the multiple computers at the same time.

Automatic On/Off using Timer function

Automatically turn on or off the projectors at specified date/day and time by using the
clock function.

Control port ready for external equipment via network

This product provides a serial port (RS-232C) for controlling external equipment. By
connecting the equipment which has a serial port, it can be controlled by a computer
via the network. 

* This product does not provide the interface driver software to control exter-

nal equipment.

Internet
Intranet

PC2

PC4

PC3

PC5

PJ2

PJ1

PC1

Turn on the DVD player
and start playing.

DVD Player

Now it's 11:30

I am ready to turn ON,
and select SLOT2 (DVI)

Internet
Intranet

PC4

PC3

PC5

PJ2

PJ1

PJ4

PJ3

Select SLOT2
for PJ1 to PJ4

Summary of Contents for POA-MD13NET2

















































































































































































Reviews:

No comments