Sanyo POA-MD13NET2 Owner'S Manual Download Page 134

Page: 134 / 176

Chapter 4 Controlling the Projector

Save Actual Adjustment

This function is to save and load the control values of the projector. The
storable control items are Input, PC, System, Image and Screen controls.

Adjust and set the controls

Set the controls properly according to the selected source. (see pages 34-40 for
further adjustment)

Select the Save page

Click on the

Save

icon from the control

menu. The setting page is displayed as
the right. Change pages by clicking on
the page numbers “1” to “7” linked
text and check the current settings.
For further information please see the
next page.

Name the current setting

Select a set number (Set1 to set10)
you intend to store current settings
with the pull-down menu button of the

Save Setting No.: Save to

. Name this set number onto the

Memo

text area.

Save the current setting

Press the

Set

button to store the current setting and name into the selected set

number.

✐

You can store up to 10 sets of controls into the Network Board.

Select a set
number

Type a memo for the
selected set number

Summary of Contents for POA-MD13NET2

















































































































































































Search results

Summary of Contents for POA-MD13NET2

Reviews:

Related manuals for POA-MD13NET2

Brands by name

Popular brands

Sanyo POA-MD13NET2, Owner'S Manual

Search results

Summary of Contents for POA-MD13NET2

Reviews:

Related manuals for POA-MD13NET2

Brands by name

Popular brands