Sanyo POA-MD13NET2, Owner'S Manual

Page: 122 / 176

Input
This function is to select the input mode and slot to the projector. Select
the input slot with the radio button, and input source mode with the pull-
down menu button. Then set the selected input source and source mode
by pressing the Set button.
34
Chapter 4 Controlling the Projector
Select a source
mode with pull-down
menu.
Select a slot with
radio buttons.
Mounted Board name
Control the projector
The control menus are displayed on the upper side of the page. When you click each
control icon, the control page is displayed according to the control menu you select-
ed. The setting method differs depending on the contents of the page. Click on the
page number linked texts to change pages and select desired setting items.
✐
Please see the owner's manual of the projector to have the further information of
each control item.
✐
The control page displays valid control items depending on the selected input mode, signal or
functions of the projector you use, therefore, there may be different controls between the
described items and actual control items on the page display.
✐
When the projector is in standby, only the timer on the setting menu is effective; others are
inactive.
Item Description
SLOT ................Displays slot no. and board
name installed in the projector.
The setting items differ from
the actual depending on the
board function.